HYPERDESMO ® ADY-E-Chroma
Single-component membrane based on fully aliphatic polyurethane resin
HYPERDESMO ® ADY-E-Chroma Polyurethane membrane
HYPERDESMO®-ADY-E CHROMA is an aliphatic, single-component polyurethane membrane that acts as a protective layer (top-coat) or independent waterproofing . It is characterized by high resistance to UV radiation , thanks to which it does not turn yellow and maintains color durability even in intense sunlight. It has a thixotropic formula , allowing easy application on sloping and vertical surfaces without the risk of dripping. The product provides excellent flexibility, mechanical and chemical resistance , constituting an ideal solution for protecting roofs, terraces, balconies and other structures exposed to atmospheric factors.
HYPERDESMO ® -ADY-E-Chroma is a single-component membrane based on a fully aliphatic polyurethane resin. After polymerization, it creates a hard but highly flexible, non-yellowing coating. It contains inorganic fillers that give the membrane excellent mechanical properties and resistance to chemicals, heat, UV and other environmental factors. The product has a thixotropic rheology that allows for efficient application on inclined and vertical surfaces without the phenomenon of dripping. Non-IMO product.
APPLICATION
- Waterproofing and protection of surfaces such as:
- Roofs, terraces, balconies,
- Verandas and structures exposed to weather conditions,
- Protection of polyurethane membranes against UV radiation,
- Top coat for HYPERDESMO® systems,
- Independent waterproofing membrane on surfaces with high mechanical resistance.
FEATURES AND BENEFITS
- Fully aliphatic polyurethane membrane – does not yellow or chalk under the influence of UV radiation.
- Low solvent content – non-flammable product (non-IMO).
- Thixotropic rheology – easy application on inclined and vertical surfaces without dripping.
- Excellent mechanical resistance – high flexibility, resistance to stretching and tearing.
- High chemical and hydrolysis resistance – ideal protection against environmental factors.
- Hydrophobic coating – resistance to water and moisture.
- Colour stability – intense colours (e.g. red) do not fade when exposed to sunlight.
CONSUMPTION
- Minimum total consumption: 0.5-1.5 kg/m² (depending on application).
PACKAGING
- 1kg, 6kg, 15kg .
CERTIFICATION
- CE certified as part of the HYPERDESMO® system .
- ISO 9001/14001 & OHSAS 18001 .
HYPERDESMO SYSTEM application guide
APPLICATION
- Mixing:
- Mix thoroughly by hand or with a low-speed mixer ( 300 rpm ).
- For spray application, add up to 10% SOLVENT-01 .
- Application:
- Application method: brush, roller, brush or airless spray.
- Wear:
- 0.5 kg/m² as top coat,
- 1.5 kg/m² as a stand-alone waterproofing membrane.
- Top-coat application time: do not exceed 72 hours after application of the main membrane.
Waterproofing, renovation and protection:
- flat and sloping roofs with strong UV exposure
- protection of thermal insulation made of PU and polystyrene foam
- lightweight roofs made of metal and fibre cement
- water tanks
- drainage channels
- other building structures