HYPERDESMO ® -T is a single-component liquid polyurethane resin.
HYPERDESMO ® T is a single-component liquid polyurethane resin. After polymerization, it creates a transparent, flexible, seamless coating that strongly adheres to the substrate over the entire surface. Very hydrophobic, excellent UV resistance, fully aliphatic (never yellows as a result of exposure to the sun). A membrane specially designed to protect new and repair leaky terraces, balconies and verandas without tearing ceramic tiles (or other surfaces) and to bind quartz aggregates and stone in the form of a stone carpet. It creates a system together with the PRIMER-T primer and PU FINISH-MATTE (decorative satin-matt finish). Consumption depending on the type of surface and application: 0.2-1.0 Lt/m 2 .
APPLICATION
- Transparent waterproofing and protection of surfaces such as:
- Ceramic tiles,
- Natural stone,
- Wood,
- Verandas and balconies,
- Microcement, architectural concrete, terrazzo,
- Terraces,
- Polycarbonate roofs,
- Sealing concrete and masonry,
- Binding sand, gravel and decorative stones.
FEATURES AND BENEFITS
- Single-component, transparent polyurethane membrane – cures on exposure to moisture.
- Full UV resistance – does not yellow or change color when exposed to sunlight.
- Excellent adhesion to many surfaces , including glass, ceramics, metal and concrete.
- Thixotropic formula – facilitates application on inclined and vertical surfaces.
- High mechanical and chemical resistance – resistant to detergents and cleaning agents.
- Vapour permeability – prevents moisture accumulation under the membrane.
- Thermal resistance :
- Permanent exposure: up to 80°C ,
- Thermal shock: up to 200°C ,
- Flexibility at low temperatures down to -40°C .
- Can be used as a binding for stone and sand carpets .
CONSUMPTION
- Minimum total consumption: 0.8-1.0 kg/m² .
PACKAGING
- 1kg, 4kg, 10kg, 20kg .
CERTIFICATION
- ISO 9001/14001 & OHSAS 18001 .
HYPERDESMO SYSTEM application guide
Application
- Preparation of the substrate:
- The surface must be clean, dry and degreased.
- For smooth surfaces (ceramics, glass) it is recommended to prime with PRIMER-T or MICROPRIMER PU .
- Application:
- Application method: roller or airless spray.
- Wear:
- Horizontal surfaces: 2 layers of 0.5 kg/m² ,
- Vertical surfaces: 3-4 layers, total consumption 0.8-1.0 kg/m² .
- Recoat time: 6-24 hours .
- If 24 hours are exceeded , the surface requires MICROPRIMER PU activation .
Stone Binding/Stone Carpets
Waterproofing and protection
- ceramic tiles
- natural stone, marble
- wood
- polycarbonate, glass
- terraces, balconies, verandas