GEODESMO-50
A fast-setting, single-component, polyurethane-based universal primer for use on a wide range of substrates prior to the application of Hyperdesmo and Aquasmart products.
GEODESMO-50 Primer
GEODESMO-50 primer is a single-component, polyurethane-based universal primer used for a wide range of substrates. It can be successfully used on porous and smooth, absorbent and non-absorbent surfaces. It is characterized by low viscosity and balanced setting time resulting in easy application and short application time of the next coat on any type of surface, both very porous, medium and smooth (e.g. glass and metals). In addition, it can be effectively used on both dry and wet concrete (then 2-3 times priming is necessary), not only as a primer but also as an economical impregnation agent, additionally increasing the resistance of concrete. Application by brush or roller. Consumption: 100-500 gr/m 2 , depending on porosity and absorbency.
APPLICATION
- Priming of mineral substrates.
- Quick-drying primer for use on concrete, metal, glass and other surfaces.
- Used as a faster version of MICROSEALER-50.
- It can be used on both dry and wet concrete.
- It can act as an impregnation increasing the resistance of concrete.
FEATURES AND BENEFITS
- One-component – easy to use.
- Quick-setting – enables quick application of subsequent layers.
- Low viscosity – facilitates penetration of the substrate.
- Easy to apply with a brush or roller.
- Excellent performance and flexibility.
- High adhesion to various surfaces.
- Deeply penetrating – increases the substrate’s resistance to peeling and abrasion.
CONSUMPTION
- Concrete: 100-500 g/m², depending on the porosity and absorbency of the substrate.
PACKAGING
- Capacities: 1L, 4L, 20L.
CERTIFICATION
- CE certification according to ETAG 005 (parts 1 and 6).
- CE certified according to ETAG 033 (as part of HYPERDESMO® systems).
- ISO 9001/14001 & ISO 45001.
HYPERDESMO SYSTEM application guide
APP
- Surface preparation: Clean the surface with a high-pressure washer, remove oils, waxes, cement laitance and old coatings.
- Application: Brush or roller.
- Drying time: Subsequent layers can be applied 3-4 hours after application, but no later than after 48 hours.
- Do not exceed recommended consumption.
Priming the surface before applying Hyperdesmo family membranes:
- universal primer, porous and smooth, absorbent and non-absorbent surfaces
- also used as an impregnation